What the safeties catch, not the headline load · review
HULKFIT Power Cage 800 lb review
A power cage on 2 × 2 in 11-gauge uprights with standard 5/8 in holes and nylon safety straps instead of pipes, rated 800 lb and published at 82 × 48 × 47 in overall.
5/8 in holes, compatible with third-party accessories
800 lb capacity
82 × 48 × 47 in (H × L × W) overall
Nylon safety straps and J-hooks included; extra-long 2 in plate posts
Optional lat pulldown and cable crossover, built for this cage only
The uprights are the specification
Two-by-two inches is the common section for home cages; 11-gauge is a thick wall at this price. Add the 5/8 in hole diameter, and the cage is on the standard most attachments are made for. It is the most useful upright description on this shelf.
Straps instead of pipes
Nylon straps catch a bar more quietly than steel pipes and do not chew the knurl. They move by hand. They also need checking for wear, which a pipe does not.
Availability
No live offer on Amazon.com on the day of reading; the 30-day average was about $212. The page is kept because offers have come and gone within the last six months.
What the listing leaves out
Number of height positions, hole spacing and anchoring.
Figures are read from the Amazon.com listing on November 8, 2026. Price and stock change without notice.
Prices quoted in this text were read on November 8, 2026. The live price is at the top of the page.
The figures declared, and the gaps beside them
Strengths
Only listing here that publishes the hole diameter, 5/8 in
2 × 2 in uprights in 11-gauge steel, the heaviest wall stated
Nylon safety straps protect the bar and set without tools
Outside dimensions published
Compromises
800 lb rating
No live Amazon.com offer on the day of reading
Cable attachments fit this cage only
Specifications
Overall height
82 in (208 cm)
Footprint
48 × 47 in (122 × 119 cm) outside
Upright section
2 × 2 in, 11-gauge steel
Height positions
Not published
Hole diameter
5/8 in (16 mm), standard
Max total load
800 lb (363 kg)
Load basis
Total
Accessories
J-hooks, nylon safety straps, extra-long 2 in plate posts; lat pulldown and cable crossover add-ons sold separately
Anchoring
Not stated
Amazon reference
B0H5WNBB7P (Amazon.com)
EAN
0810229420554
What buyers ask about this one
Why does the 5/8 in hole matter?
It is the common hole size for 2 × 2 in racks. With it, J-hooks, dip bars and other attachments from other brands can fit, which keeps the cage useful as the gym grows.
Straps or pipes?
Straps are quieter, kinder to the bar’s knurl and quick to move. Steel pipes are what most cages use. The listing describes straps as the supplied safeties.
Is it in stock?
No live offer was found on Amazon.com on November 8, 2026; the 30-day average was about $212. Check the buy box.
Our score
7.8/ 10
The best-specified uprights on this shelf: 2 × 2 in, 11-gauge, 5/8 in holes. That last figure is the one that lets standard third-party J-hooks and dip bars fit, and no other listing here gives it. The 800 lb rating is modest, and no live offer was found on Amazon.com on the day of reading.
The price on Amazon.com
This model is listed on Amazon.com, with no price read at the last reading. Listed is not the same as in stock: availability changes daily, and the buy box shows the live price.
Details checked on November 8, 2026.
Who this one is for, among strength training equipment
Solo training in a garage, with room to add third-party attachments later
This model in our strength training equipment guides
Specifications: the manufacturer sheet for home gym equipment and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
A full-size power cage on a 14-gauge steel frame with a 2,130 lb combined capacity, 18 numbered levels for J-hooks and spotter arms, a reversible pull-up bar with a 32 mm grip and six band pegs — sold by Amazon itself.
Best for: A shared home gym where several people reset the J-hooks and spotters between sets
Full-size rack, 300 lb each on pull-up bar, J-hooks and spotter arms, 100 lb per plate holder, 18 J-hook positions
A full-size power rack that rates each zone separately — 300 lb on the pull-up bar, 300 lb on the J-hooks, 300 lb on the spotter arms and 100 lb per plate holder — with 18 J-hook positions and an 8-position angled pull-up bar.
Best for: Lifters who want to know what the spotter arms are rated to before trusting them
Squat stand, 2 × 2 in steel, 66 lb, J-hooks tested to 1,100 lb (600 lb working), bumpers 2,645 lb
A two-column squat stand on 2 × 2 in steel tubing that publishes both its factory-tested loads — 1,100 lb on the J-hooks, 2,645 lb on the safety bumpers — and the lower working loads it recommends: 600 and 1,800 lb.
Best for: A compact squat and bench setup where the buyer wants tested and working loads stated separately