Olympic or standard, then the steel and the sleeves · review
CAP 7 ft Olympic Bar 35 lb review
A 7 ft Olympic bar at a standard bar’s price: 2 in sleeves turning on bronze bushings, a 35 lb bar weight, a 500 lb capacity, volcano-style knurling with a center knurl and a 100,000 PSI tensile rating.
Steel rated at 100,000 PSI tensile strength, hard chrome finish
The Olympic system, for a standard bar’s money
At about $60, it costs the same as the 60 in Amazon Basics standard bar on this shelf. The difference is the system it opens: 2 in Olympic plates, full-size racks and a sleeve that turns. A bar is the piece that is hardest to replace later, and this one puts a home gym on the Olympic standard from the start.
Bushings, named
Rotating sleeves spare the wrists during presses and cleans. CAP names bronze bushings, the common choice at this price; needle bearings, which spin faster, are found on bars built for the Olympic lifts and cost more.
The knurl, described
Volcano knurling is CAP’s term for a grip pattern that holds without tearing the hands, and the center knurl matters for back squats. Both are descriptions rather than measurements: no knurl depth is published.
What the listing leaves out
The shaft diameter, which decides how the bar sits in the hand, the loadable sleeve length and whether collars come with it. The price has fallen from an average near $78 over six months.
Figures are read from the Amazon.com listing on November 8, 2026. Price and stock change without notice.
Prices quoted in this text were read on November 8, 2026. The live price is at the top of the page.
The figures declared, and the gaps beside them
Strengths
Olympic 2 in sleeves and a 7 ft length that fit standard power racks
Bronze bushing sleeves, named rather than implied
States a 100,000 PSI tensile strength, a figure few budget bars publish
Center knurl helps the bar stay put on the back during squats
Compromises
No shaft diameter or sleeve length published
500 lb capacity, well below the CAP Beast’s 1,200 lb
35 lb is not the 44 lb standard men’s bar weight, which matters for anyone counting toward competition totals
Specifications
Bore
2 in (50 mm) Olympic sleeves
Length
7 ft (86 in, 218 cm) overall
Bar weight
35 lb (15.9 kg)
Loadable sleeve length
Not published
Shaft diameter
Not published
Load rating
500 lb (227 kg)
Standard cited
None; tensile strength stated as 100,000 PSI
Sleeve rotation
Bronze bushings
Knurl
Volcano-style, with a center knurl
Collars supplied
Not listed
Finish
Hard chrome
Amazon reference
B0BFZFJDSH (Amazon.com)
What buyers ask about this one
Is 35 lb a normal Olympic bar weight?
It is lighter than the 44 lb (20 kg) men’s competition bar. Count 35 lb when adding up the load on the bar, not 45.
Will it fit my power rack?
At 7 ft with 2 in sleeves, it is the length full-size racks are built around. The racks on this shelf all expect a 7 ft bar.
What does 100,000 PSI mean?
It is the tensile strength of the steel, the stress at which it breaks under tension. Higher figures generally mean a bar that resists permanent bending; the CAP Beast lists 120,000 PSI.
Are collars included?
The listing does not mention collars, so plan to buy a pair.
Our score
8.0/ 10
The entry ticket to the Olympic system. It fits 2 in plates and full-size racks, its sleeves turn on bronze bushings, and it states a tensile rating — 100,000 PSI — which budget bars rarely give. At 35 lb it is lighter than the 44 lb men’s competition bar, and the 500 lb capacity will hold most home lifters for years.
The price on Amazon.com
This model is listed on Amazon.com, at ≈ $60 at the last reading. Listed is not the same as in stock: availability changes daily, and the buy box shows the live price.
Details checked on November 8, 2026.
Who this one is for, among strength training equipment
A first Olympic bar for a power rack, at the price of a standard bar
This model in our strength training equipment guides
Specifications: the manufacturer sheet for home gym equipment and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
7 ft Olympic bar, 1,200 lb capacity, 120,000 PSI steel, bronze bushings, phosphate finish
CAP’s heavy-duty 7 ft Olympic bar: a 1,200 lb capacity, 120,000 PSI steel, bronze bushing sleeves, volcano knurling and a phosphate finish that keeps the knurl’s feel — the highest rating of the four bars here.
Best for: Heavy squats and deadlifts in a home rack, where the bar has to outlast the lifter’s progress
6 ft Olympic bar, 2 in sleeves on bronze bushings, 28 lb, 500 lb capacity, black E-coat
A shorter Olympic bar for rooms that cannot swing 7 ft: 6 ft long, 28 lb, 2 in sleeves on bronze bushings, a 500 lb capacity, hill-style knurling and a black E-coat finish.
Best for: Olympic plates in a small room, on a bench with uprights rather than in a full-size rack
60 in standard bar, 1 in sleeves 10.6 in long, 13.4 lb, 250 lb capacity
A 60 in chrome bar for standard 1 in plates, which publishes the figures most standard bars leave out: 10.6 in of loadable sleeve, a 13.4 lb bar weight and a 250 lb capacity.
Best for: A first bar for a set of standard 1 in plates, where the room cannot take a 7 ft Olympic bar