What the safeties catch, not the headline load · review
JELENS S21 Power Cage review
A modular power cage with an adjustable cable crossover on stainless steel ball-bearing pulleys, four integrated plate posts and over twenty attachments, stating 2,000 lb — with no dimensions in its bullet points.
Pulleys on precision stainless steel ball bearings
20+ attachments: lat bar, T-bar, cable bar, 2 handles, rope, 2 J-hooks, 2 safety frames, 2 dip bars, landmine, foot board
Ships in two boxes
Everything in the box
The accessory list is the longest on this shelf, and it includes things other cages sell separately: dip bars, a foot board for rows, a landmine. For a buyer furnishing a garage in one order, that is the selling point.
Bearings, named
It is the only cage here that says what its pulleys run on: stainless steel ball bearings. That is a quality marker for cable feel, and it is stated rather than implied.
The dimensions you have to find elsewhere
The bullets never give a size. Amazon’s item data — about 49 × 63 × 82 in — is the only source, and it does not say whether it describes the cage alone or with the crossover arms.
What the listing leaves out
Dimensions, upright section, hole size and spacing, pulley ratio, and the basis of the 2,000 lb figure.
Figures are read from the Amazon.com listing on November 8, 2026. Price and stock change without notice.
The figures declared, and the gaps beside them
Strengths
Over twenty attachments, including dip bars and a foot board
Pulleys on stainless steel ball bearings, named
Four integrated plate storage posts and accessory hooks
Compromises
No dimensions in the listing’s bullets
2,000 lb rests on design standards that are not named
Price swings: about $460 today against a 30-day average near $365
Specifications
Overall height
81.9 in (208 cm) as Amazon lists the item; not in the bullets
Not published; cold-rolled alloy steel, three-layer surface protection
Height positions
Not published
Hole diameter
Not published
Max total load
2,000 lb (907 kg), stated as a safe weight
Load basis
Total; design standards not named
Accessories
Lat bar, T-bar, cable bar, 2 handles, tricep rope, 2 J-hooks, 2 safety frames, 2 dip bars, 360° landmine, foot board and more
Anchoring
Not stated
Pulley bearings
Precision stainless steel ball bearings
Amazon reference
B0FBRJ19TF (Amazon.com)
EAN
6978178937920
What buyers ask about this one
How big is it?
The bullets do not say. Amazon’s item data gives about 49.2 × 63.3 × 81.9 in; check the manual or ask the seller before measuring the room against it.
Is 2,000 lb tested?
The listing calls it a safe weight backed by strict design standards, without naming them or describing a test.
Does it ship in one box?
Two boxes, according to the listing.
Our score
7.3/ 10
The most attachments of any cage here, and the only one to name its pulley bearings. The 2,000 lb figure rests on unnamed design standards, and the listing’s bullets give no dimensions; Amazon’s item data puts it at about 49 × 63 × 82 in. Measure the room against those before ordering.
The price on Amazon.com
This model is listed on Amazon.com, at ≈ $460 at the last reading. Listed is not the same as in stock: availability changes daily, and the buy box shows the live price.
Details checked on November 8, 2026.
Who this one is for, among strength training equipment
A buyer who wants the cage, the cables and the attachments in one order
Sources
Specifications: the manufacturer sheet for home gym equipment and the matching Amazon product page. Prices and availability: Keepa. Every figure on this page names its source.
A full-size power cage on a 14-gauge steel frame with a 2,130 lb combined capacity, 18 numbered levels for J-hooks and spotter arms, a reversible pull-up bar with a 32 mm grip and six band pegs — sold by Amazon itself.
Best for: A shared home gym where several people reset the J-hooks and spotters between sets
Full-size rack, 300 lb each on pull-up bar, J-hooks and spotter arms, 100 lb per plate holder, 18 J-hook positions
A full-size power rack that rates each zone separately — 300 lb on the pull-up bar, 300 lb on the J-hooks, 300 lb on the spotter arms and 100 lb per plate holder — with 18 J-hook positions and an 8-position angled pull-up bar.
Best for: Lifters who want to know what the spotter arms are rated to before trusting them
2 × 2 in 11-gauge uprights, 5/8 in holes, 800 lb, 82 × 48 × 47 in, nylon safety straps
A power cage on 2 × 2 in 11-gauge uprights with standard 5/8 in holes and nylon safety straps instead of pipes, rated 800 lb and published at 82 × 48 × 47 in overall.
Best for: Solo training in a garage, with room to add third-party attachments later
A figure written into a sentence below was read once, on the day that sentence was written, and nothing has refreshed it since. The amount a shop is asking right now loads beside the product itself — that is the only one still current.