Three diameters that do not mix, and one rating that means something · review
A solid-steel 120 cm bar that publishes four dimensions at once: inner measurement, sleeve length, knurl length and its own mass. The 100 kg rating is the second lowest here and is stated plainly.
The bottom line The most carefully dimensioned bar in the 30 mm half of this family. An inner measurement given to a tenth of a centimetre, sleeve and knurl lengths published, and a mass — four figures that let this bar be matched to a rack and to a plate collection before it is ordered. The 19 cm sleeve is the honest limit, and the maker publishes it rather than leaving it to be discovered.
Four dimensions, which on this shelf is generous:
Solid chromed steel, a maximum load of 100 kg, two star collars supplied, and a thread on the sleeve that the maker says is there to stop the plates rattling.
Seventy-nine point four centimetres is the span between the sleeves. It is what sits between a rack’s uprights, and it is the figure that decides whether a bar can be racked at all.
Publishing it to a tenth of a centimetre is more precision than the measurement needs and considerably more than the shelf offers. It is the kind of detail that suggests somebody measured rather than estimated.
Short, published, and the thing that will stop a loading before the 100 kg does.
The arithmetic is the same on every bar: the thickness of the plates for one side, plus the collar, against the sleeve figure. With cement plates the 19 cm fills quickly; with thin cast iron it holds a useful amount.
Two areas of 20 cm rather than one continuous stretch. That is the maker saying where the hands are expected to go, which on a 120 cm bar with a 79.4 cm inner span leaves the centre bare.
It is a design statement rather than a specification, and the page reports it as published.
From 51 € to 68 € across the German and French Amazon stores, on the one reading this page rests on.
The British, Italian and Spanish Amazon catalogues list the reference with nobody selling behind it.
The American Amazon store returned nothing at all, so the buy button there opens a search rather than an empty page.
These figures are what Keepa returned on the day this page was last written. Stock and prices move without notice.
Prices quoted in this text were read on 20 September 2026. The live price is at the top of the page.
| Bore | Ø 30 mm |
|---|---|
| Length | 120 cm overall; inner measurement 79.4 cm |
| Bar weight | Approximately 6.9 kg, as the maker states it |
| Loadable sleeve length | 19 cm per side |
| Shaft diameter | Not published by the maker |
| Load rating | 100 kg maximum, as the maker states it |
| Standard cited | None cited by the maker |
| Sleeve rotation | Not published by the maker |
| Knurl | Two cross-knurled areas of 20 cm each |
| Collars supplied | Two star collars, included |
| Amazon reference | B0C2J512RW (one reference across 5 Amazon marketplaces) |
| EAN | 5902308230156 |
It is the inner measurement — the span between the sleeves — and it is what has to clear a rack’s uprights. Publishing it to a tenth of a centimetre is more precision than this shelf usually offers, and it is the figure to compare against a rack’s inside width.
That depends entirely on the plates. Nineteen centimetres per side takes a useful number of thin cast-iron plates and rather few cement ones, and the maker publishes the figure so the arithmetic can be done before ordering rather than after.
The maker states the bar is made from solid steel rather than tube. It is a construction fact rather than a measurement, and it is reported as the maker’s word — the published 100 kg rating is the claim about what it carries.
A rack owner who needs the inner measurement before ordering
A reference exists on these Amazon stores: France, Germany, Italy, Spain, United Kingdom. Listed is not the same as in stock — availability changes daily.
Details checked on September 20, 2026.
Specifications: manufacturer sheet and Amazon product page. Prices and availability: Keepa. No product on this site has been physically tested.
25 mm bore, 26.9 cm sleeves, 113 kg
A 152 cm chromed bar that publishes its sleeve length — 26.9 cm — which is the longest in this family and the figure that actually decides what goes on a bar.
Best for: A 25 mm collection where sleeve space matters more than headline capacity
25 mm bore, inner grip 104 or 112 cm
The most completely specified bar in this family, and one of the few anywhere that publishes an inner grip length for each version. A 25 mm bore, which is neither of the two common figures.
Best for: Somebody matching a bar to a rack, who needs the inner measurement published
50 mm, 28 mm shaft, 13 kg, 350 kg
The only bar in this family to publish its bearing arrangement: two needle bearings and one bushing per side, under a hard chrome finish, with a 350 kg rating and a stated 28 mm shaft.
Best for: A 50 mm collection where the rotation and the shaft diameter are the point
